Hand Tool Headquarters of the Midwest

[Dave Lehnert]

Last week reading Christopher Schwarz Blog on Popular Woodworking dot com about the "Hand Tool Headquarters of the Midwest" located in Millersburg Ohio.
I just happen to be visiting the area this past week and stopped in for a look. Yep! he does have about anything you want. His prices seemed to be spot on what one would pay at full retail. Some things seemed high to me but admit I don't know all the differences on what makes one tool pricier over another.
I visit the area once or twice a year (and drive past it) and never knew he was located there. You would never know it was a tool shop

I had to laugh. When I walked in I said I read about him on Christopher Schwarz Blog. His response "Another one of those" LOL!!!

[Jim Koepke]

If you do not ask, you do not get. One thing common among second hand dealers is people asking for a discount. In some places it is so much a part of business the prices are at full retail to allow for discounts so people feel like they are getting a deal.

You will find it surprising how often one can work a deal with a seller even in an antique mall. Often after asking for a discount the counter person will make a phone call to see if they can come down on the price.

Some times they will want you to pay cash so there isn't a credit card fee. Others might run a discount if you buy a few items.

Some will lower prices on an item if it has been collecting dust for a while.

Be polite, be reasonable, be willing to walk away.

jtk

[Greg Wease]

One time I looked at a drawknife at tool swap meet for $10 and planned to buy it. When I told the seller I was going to use it on a chair I was making he said the price for someone planning to use it is $5. You might ask for the "user" price vs. the "collector" price to see if there is a difference.

[Dave Lehnert]

Yes, I'm sure a discount could be had. When you see hand planes priced at $110 a good bet $100 would get it out the door.
Hard to believe but I walked out without buying anything. I have so many hand tools now I need to step back and look at what I do and do not have.
But like I said above, If I ever find a need for something this is the place to go.

[Jim Koepke]

Yes, I'm sure a discount could be had. When you see hand planes priced at $110 a good bet $100 would get it out the door.

There are not too many standard hand planes worth $100 as a user. A #1 or #2 at that price is a steal.

My most expensive Stanley/Bailey bench plane, other than a #2, is a #8 at $50. My second most expensive bench plane is a #8 that cost $5. It had a broken frog that cost my about $35 to replace.

jtk

[Dave Lehnert]

There are not too many standard hand planes worth $100 as a user. A #1 or #2 at that price is a steal.

My most expensive Stanley/Bailey bench plane, other than a #2, is a #8 at $50. My second most expensive bench plane is a #8 that cost $5. It had a broken frog that cost my about $35 to replace.

jtk



Stanley scrub plane was priced at $110

[steven c newman]

On your way to that place...there is another...."corner" of I-70 and US 40....South East corner of Springfield,OH.....called Heart of Ohio....plan for a full day, just to walk through the place...

[Jim Koepke]

Stanley scrub plane was priced at $110

That is about $70 more than mine cost at an antique store. Not sure of he cost since it was priced at $40 and bundled with a bunch of other stuff and the guy gave me a price cut on the total. Mine was priced low to start. On ebay they seem to going for something between $50 and $80.

My guess is they are used to people wanting a bargain and set their prices so even the hired help can haggle a bit.

This is why if one is even thinking of buying used tools it is important to research price trends with ebay and other sites.

Here are some prices from Patrick Leach's September tool list:

(these descriptions have been edited)

#3 smoothing plane; a ca.1930 example $90.00

#4 1/2 oversize smoothing plane; an extra heavy UK made
model $95.00

#4 1/2C corrugated smoothing plane; a type 11 $125.00

#6 fore plane; thicker WWII casting for more mass that
aids planing $110.00

#5 1/4 junior jack plane; WWII production with stained
hardwood knob and tote, frog adjusting screw $60.00


Of course he has some priced higher. Mr. Leach is known for his full retail pricing. My guess is most of these are likely already sold.

All three of my #3 sized planes put together cost me less than $90. Both of my #6s together cost me less than $110. Of course that was at a time when people were paying attention to Mr. Leach's opinion about them being a useless size. In my opinion, if it can take a controllable shaving, it is useful.

jtk