View Full Version : Woodmaster Model W-712
Lowell Poore
08-17-2018, 11:31 AM
I just purchase a Woodmaster W-712, the original owner purchaser it in 1989, and along the way the motor was removed. I was told by the previous owner this piece of equipment needs a 5 hp motor but he didn't know the required RPM or the size of pulley on the motor. Hope someone can help me with this, thanks Lowell
Steve Eure
08-17-2018, 12:01 PM
I would go to the Woodmaster site and inquire there. If I am not mistaken, that machine is still in production or one nearly like it.
https://www.woodmastertools.com/category/planermolders/model-712-planer-molder/
Hope this helps.
Steve
Bruce Page
08-18-2018, 12:28 PM
The current 712's all use a 5hp, 3450 rpm motor.
Welcome to SMC
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.