Woodmaster Model W-712

[Lowell Poore]

I just purchase a Woodmaster W-712, the original owner purchaser it in 1989, and along the way the motor was removed. I was told by the previous owner this piece of equipment needs a 5 hp motor but he didn't know the required RPM or the size of pulley on the motor. Hope someone can help me with this, thanks Lowell

[Steve Eure]

I would go to the Woodmaster site and inquire there. If I am not mistaken, that machine is still in production or one nearly like it.

https://www.woodmastertools.com/category/planermolders/model-712-planer-molder/

Hope this helps.
Steve

[Bruce Page]

The current 712's all use a 5hp, 3450 rpm motor.

Welcome to SMC