Frederick Skelly
08-10-2018, 4:53 PM
Want to get this into the archives......
I tried to order one today from Rikon, but they are on back order. I asked for a part number that I could cross-reference. So their Customer Service guy went out in the warehouse and got the number off a belt installed on a machine there. It's 240J4 and you want the 3/8" width.
If you have a 10-325 or 10-326, you might make a note of this in your manual.
Hope it helps someone.
Fred
P.S. There are many places to buy that belt cheaply online, some as low as $2 each. Unfortunately, the shipping is about $10 for a $2 belt. So I bought one made by Gates, on Amazon for $11 with Prime shipping. This worked fine for me. YMMV.
I tried to order one today from Rikon, but they are on back order. I asked for a part number that I could cross-reference. So their Customer Service guy went out in the warehouse and got the number off a belt installed on a machine there. It's 240J4 and you want the 3/8" width.
If you have a 10-325 or 10-326, you might make a note of this in your manual.
Hope it helps someone.
Fred
P.S. There are many places to buy that belt cheaply online, some as low as $2 each. Unfortunately, the shipping is about $10 for a $2 belt. So I bought one made by Gates, on Amazon for $11 with Prime shipping. This worked fine for me. YMMV.