19" Grizzly G0514 BS. Where do U gets baldes

[Ed Lang]

I am looking for blades for a Grizzly G0514 19" bandsaw. The blades will be used for resawing and cutting bowl blanks. I expect 1/2" wide blades saw 4 teeth per inch hook will be fine. Unless of course you have had good experience with something else.

If I recall right, 143 1/2" is the length but I expect a little longer or shorter will work.
thanks

[martyphee]

Just call http://www.suffolkmachinery.com/ and they'll give you a blade any length you desire.

[Chris Padilla]

www.grizzly.com (http://www.grizzly.com) might also work but suffolk is THE place.

[tod evans]

i go through quite a few hss blades and the best price i found is ellis mfg. in verona wis. 800-383-5547. .02 tod

[Steve Cox]

Just about any commercial saw service will make them to any length. Look under "sharpening" in your phone book and call around.

[Ken Shoemaker]

You can't go wrong with Suffolk... They'll get you what you need... I got mine there.