Byron Trantham
06-30-2003, 8:28 AM
I finally found how to adjust the fence for level to the in-feed and out-feed tables. Mine was tipped to the right, touching on in the in-feed and about 3/8" high on the out-feed. Thought I would pass this on as it took me forever to "see" the proper bolts to loosen. The first pic is the bolt. There are actually two of them. The one not shown is to the left under the fence mechanism. That one is a through bolt the one in the picture is a sloted hole allowing for up and down movement (rocking motion). The bolts are 8 mm allen heads. Loosen th bolt and adjust for paralleism with the two tables. Took two seconds. The next picture is of the three "ajusters" for the out-feed table. Can anyone tell me what they do and how they interact? Thanks.