Adjustable feet

[Steve Jenkins]

I put adjustable feet on most tables I build. I use the kind that have a threaded post that screws into a tee nut. I recess them so if not needed for leveling they don’t show. What I’m looking for is what I’ve been using instead of tee nuts. They are round and flat and held in place by three small screws. I had a bunch and over the years used them all. Not sure what they’re called but that’s what I’m looking for.
Thanks

[Jamie Buxton]

Mcmaster Carr has them. www.mcmaster.com Look up part number 94122A100

And Rockler http://www.rockler.com/screw-on-tee-nuts-choose-size-thread

[Steve Jenkins]

Thanks Jamie. Tried McMaster Carr earlier but couldn’t find them. Ordered some