Question for you Super Dust Gorilla owners

[Steven J Corpstein]

Does the Oneida 2 HP Super Dust Gorilla have the capability of moving the filter assembly and the intake port to different positions?

My garage layout and where I need (would like) to place the unit, dictates that the filter assembly be 180 degrees opposite of the direction pictured on the Oneida website.

I know the 2 HP commercial unit has this feature but I cannot find specs stating that same feature on the Gorilla units.

[Roy Wall]

Stephen,

Being too lazy to look at the website...I'll still answer....

Yes - it can be positioned "any which way"....

My inlet runs right along the wall.....and then the filter comes back out the very same side parallel to the inlet...see photo...

[Roy Wall]

Lets try this one.....

[Roy Wall]

There we go!!

THis is a little weird but it allows me to utilize the wall space to the LEFT of the gorilla in the photo.

It probably sticks out from the wall about 1.5 - 2 feet ( the wall with window..)


Oneida actually drew it up this way.... so yes, it will "swing" any amount you want.

Good luck!!