View Full Version : Parf Dogs with 3/4” post?
David Shoemaker
07-14-2018, 6:42 PM
Has anyone come across any Parf Dogs with a 3/4” post? I’m only finding them in 20mm. I have a table that I want to use for track saw cuts. It already has An array of 3/4” holes.
Thx!
Michelle Rich
07-14-2018, 7:29 PM
Lee Valley
Jim Becker
07-14-2018, 7:41 PM
Lee Valley
Yup...and there's free shipping right now through the 17th. :)
David Shoemaker
07-14-2018, 8:14 PM
I looked at Lee Valley, and it appears that their Parf Dogs are only in 20mm. They have something called a surface dog in 3/4” but i’m Also looking for taller ones to align the track.
Frederick Skelly
07-14-2018, 8:24 PM
If you can't find the 3/4" ready made steel ones, you might be able to cut a 3/4" steel rod to length and use a "set screw shaft collar" from Mcmaster Carr (https://www.mcmaster.com)for about $2.50 each or look at your local hardware store. Not very pretty or elegant, but it might be good enough.
johnny means
07-15-2018, 8:29 AM
You may be able to DIY them using aluminum standoffs. They'll definitely be available in 3/4 in a multitude of lengths.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.