Parf Dogs with 3/4” post?

[David Shoemaker]

Has anyone come across any Parf Dogs with a 3/4” post? I’m only finding them in 20mm. I have a table that I want to use for track saw cuts. It already has An array of 3/4” holes.
Thx!

[Michelle Rich]

Lee Valley

[Jim Becker]

Lee Valley

Yup...and there's free shipping right now through the 17th. :)

[David Shoemaker]

I looked at Lee Valley, and it appears that their Parf Dogs are only in 20mm. They have something called a surface dog in 3/4” but i’m Also looking for taller ones to align the track.

[Frederick Skelly]

If you can't find the 3/4" ready made steel ones, you might be able to cut a 3/4" steel rod to length and use a "set screw shaft collar" from Mcmaster Carr (https://www.mcmaster.com)for about $2.50 each or look at your local hardware store. Not very pretty or elegant, but it might be good enough.

[johnny means]

You may be able to DIY them using aluminum standoffs. They'll definitely be available in 3/4 in a multitude of lengths.