Storage cabinet for rotary attachment, extra tables, and supplies

[Barb Becker]

We also made a storage cabinet, primarily as a place for the extra table and rotary attachment, but also to store my 12x24 acrylic and other supplies.

[Matt McCoy]

Looks handy. Good job upcylcling that crate.

[Trey Tull]

I like it. I turned my crate into a chicken coupe :-)

[Kev Williams]

sorry, just had to do this :D

http://www.engraver1.com/erase2/coupe.jpg

[Gary Hair]

That's nice and all, but do you know why a chicken coupe only has two doors? Because if it had four it would be a sedan...


sorry, just had to do this :D

http://www.engraver1.com/erase2/coupe.jpg

[Mike Null]

Gary

That's good:)

The storage is also good but if it were mine I would put that rotary tool waist high. It's a heavy tool and a precision tool. Being on the bottom strains the back and leaves it open to catching all manner of stuff from above.

[John Lifer]

I agree with Mike, Mine sits vertically on floor next to the laser. And I dropped it about 6 -8" the other day back onto the floor. I have indoor/outdoor carpet over the concrete floor but it still knocked it out of alignment and If I do it a couple of more times, I'll be redrilling holes and maybe worse. Put on shelf that allows you to pull it out directly and easily.

[Barb Becker]

No chickens, but we do have Guinea fowl that already have a coop, with a truck cap roosting/viewing penthouse ;) And thanks for the suggestions about moving the rotary up.
389563389564