vacuum gauge

[Mark Singer]

Yesterday I was able to buy the misc fittings and a filter at home depot. They did not have a vacuum gauge...Where is a good place to get one? I am watching a few on the auction site from the Bay area

[Dave Richards]

MarK, what range and units are you after? I might know of one or two that I could get my hands on.

[tod evans]

auto parts store 3" face under 15$ with a hose and addaptors. tod

[Rick Lizek]

www.surpluscenter.com (http://www.surpluscenter.com)

[Mark Singer]

Rick
The surpus center looks great!! Thanks...That is where I bought the Gast pump

[sascha gast]

What are you building??
if youi are building a vacuum chuck for a lathe, yoiu are doing good and the surplus center is the way to go, as is joewoodworker, he has it all.
If you are building a vacuum veneering system, gimme a call
310-753-6506, i'll have to chat with you

sascha

[John Scarpa]

The surplus center does look good. There are Grainger stores all over the southland. You can do a google and find one near you. They carry everything it seems.

[Alden Miller]

I'm with Sascha. I built my vacuum press using parts from Joewoodworker.com. Went and picked the parts up (he's relatively local) and talked with Joe. He's a great guy and a great help if you are building a vacuum system.

-Alden