Want to try epoxy inlay, Where do I start?

[Matthew Curtis]

I am interested in doing some epoxy inlay. Maybe on some cutting boards or table tops. Is there a good source supplies. I am only interested in trying it out. I do not want to buy a large amount of supplies. i have looked at a couple of places that sell larger quantities, or at least what what I think are lager quantities. It seems rather expensive as well.

any help would be wonderful.

thanks

[Mike King]

I am interested in doing some epoxy inlay. Maybe on some cutting boards or table tops. Is there a good source supplies. I am only interested in trying it out. I do not want to buy a large amount of supplies. i have looked at a couple of places that sell larger quantities, or at least what what I think are lager quantities. It seems rather expensive as well.

any help would be wonderful.

thanks
There is an article on the subject in the April 2018 edition of Fine Woodworking. Epoxy isn’t cheap but you can buy smaller quantities at Woodcraft, West Marine, or some hardware stores. Transtint dyes work well.

[Frederick Skelly]

There is an article on the subject in the April 2018 edition of Fine Woodworking. Epoxy isn’t cheap but you can buy smaller quantities at Woodcraft, West Marine, or some hardware stores. Transtint dyes work well.

I read that article. It was informative.
Good luck Matt!
Fred