david minnery
06-27-2018, 2:35 PM
I'd be curious if anyone has hand first hand experience with this process.
I have thousands of small blocks to sand, mostly to ease the corners.
They are 1.5" cubes in hard maple.
this is what I'm looking at
http://www.kramerindustriesonline.com/barrel-finishing-systems.htm
sales rep recommended the MT 2 bar with MT 6 8 gal. barrel, thinking I could do about 300 in 2-3 hours.
100 grit abrasive.
That time frame works for me but I have no experience with this process or machine.
here is what I'd like as end result.
Any thoughts, advice is appreciated.
388591
I have thousands of small blocks to sand, mostly to ease the corners.
They are 1.5" cubes in hard maple.
this is what I'm looking at
http://www.kramerindustriesonline.com/barrel-finishing-systems.htm
sales rep recommended the MT 2 bar with MT 6 8 gal. barrel, thinking I could do about 300 in 2-3 hours.
100 grit abrasive.
That time frame works for me but I have no experience with this process or machine.
here is what I'd like as end result.
Any thoughts, advice is appreciated.
388591