View Full Version : Arm-R- Seal ?
Bruce Russell
06-22-2018, 1:03 PM
About to put the second coat of ARS on a WO kitchen island top. Waited 24hrs and scuff sanded with 400. Was going to vacuum and wipe it with a little MS. Was wondering if that might cause blotching and should use a non-sticky tack cloth instead.
John TenEyck
06-22-2018, 3:45 PM
I just vacuum. Wiping it with MS won't cause any problems as long as you let it evaporate before applying the next coat, but it doesn't add any real benefit that I can see. Whatever little fine dust the vacuum doesn't get won't cause any problems, at least not that my eyes can see.
John
Wayne Lomman
06-22-2018, 6:35 PM
Don't wipe with solvent. It turns any residual dust into a form of mud which dries hard and sticks to the surface. Cheers
Bruce Russell
06-22-2018, 8:00 PM
Thanks for that Wayne. I'll just use a tack-cloth. Cheers to you.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.