Patrick Irish
05-13-2018, 9:13 PM
I finally installed the rails and front tube on my newly used CB industrial Sawstop. I read the manual and am confused on how far the front tube is supposed to be from the front of the Saw?
I used a piece .700” thick as a spacer and tightened the tube to the rail. The fence wobbles side to side.
I adjusted the white plastic glides a little and it’s a little less wiggly but now hard to push the fence into lock position.
I guess the question is what’s the gap supposed to be the fence set in?
I used a piece .700” thick as a spacer and tightened the tube to the rail. The fence wobbles side to side.
I adjusted the white plastic glides a little and it’s a little less wiggly but now hard to push the fence into lock position.
I guess the question is what’s the gap supposed to be the fence set in?