Shooting Moxon

[James Pallas]

I was doing another task on my wannabe Moxon today and thought there may be some interest. Needed to shoot some miters that are tapered both vertical and horizontal. I have done this before works great.
the first picture is off the saw. The next are the set up. The next is the results and the set apart to prove they aren't knife marks:). Actually the pictures are reversed but you'll get the idea.
Jim

[Lamar Keeney]

Thanks, just solve a problem of angles for a project I was considering

[John Schtrumpf]

I did that (using my workmate) to put a slight angle on the edge of the hook board, of my bench hook.

[James Pallas]

I did that (using my workmate) to put a slight angle on the edge of the hook board, of my bench hook.
It would work very well with a workmates. When using a technique I always look for easy to set up, accurate, and repeatable. The small wedges are the key to making this work for almost any angle.
Jim