6" S&D pipe in indiana

[Jeremy Killingbeck]

Does anyone know where you can buy 6" S&D pipe in indiana? I can buy all the fitting at Menards, but they only sell the pipe as special order, which requires a 26pc order. All the local drainage supplies only sell SDR 35. I would much rather use the S&D pipe due to the reduce weight, so if anyone could let me know of a local source I would appreciate it.

[Jim Becker]

Check irrigation supply houses...

[Carl Kona]

Jeremy,
I ran into the same problem at my Menards, 26 pcs for the white SDR. What I also found out was they have the green SDR outside (not next to all the other PVC). So if the color doesn't bother you, see if your Menards stocks it as well.

[Jeremy Killingbeck]

Wen I looked outside the green pipe was sdr 35 and not S&d. The sdr is about 2x the weight. I called a lot of local drainage supply and all they sell is sdr 35.

[Grant Nill]

I got the green SDR 35 from Menards during one of their 11% sales. Works just fine for me!

[David L Morse]

I'm also having a problem finding someone who stocks ASTM2729. How much are you looking for? Maybe we could split the 26pc minimum order.

[Jeremy Killingbeck]

David,
i am looking for about 7pc. I would be all for splitting it, not sure if you want 20pc. Send me a pm if you are interested.

[Mike Heidrick]

There May be a min order, but more importantly whats the minimum return amount lol.

[Tim Compton]

ASTM 2729 is most usually an irrigation pipe. If you don't live in an area that does a lot of irrigation it will be expensive. SDR 35 is used as S&D. I used the green S&D, it does not weigh that much more than the 2729 stuff, plus it is smooth on the inside. I buy mine from Menards here in NWI.

[John Kee]

Check anyone that does septic systems or produces septic tanks, thats where I found the best supply of pipe and fittings.

[John K Jordan]

Did you check the large industrial plumbing supply houses? That's where I found it locally. Also, I bought most of my fittings at the Ace hardware down the hill - better price than the plumbing supply houses. They said they could order the 6" S&D but I already had enough.

JKJ

[Larry Frank]

I got the green 6" pipe from Menards and all the fittings. It all works great with my homemade blast gates.

[Alan Schwabacher]

Does anyone know where you can buy 6" S&D pipe in indiana? I can buy all the fitting at Menards, but they only sell the pipe as special order, which requires a 26pc order. All the local drainage supplies only sell SDR 35. I would much rather use the S&D pipe due to the reduce weight, so if anyone could let me know of a local source I would appreciate it.

US Plastics in Lima OH has it, and is not too far from Indiana. I stopped by on my way through the state once, and picked up a few pieces.

https://www.usplastic.com/catalog/item.aspx?itemid=24369&catid=732

[Jeff Qualmann]

Most Carter Lumber locations in SW Michigan carry the white ASTM2729. That is where I bought most of my 6" pipe (Fittings from Menards...)

[Dave Cav]

Did you check the large industrial plumbing supply houses? That's where I found it locally. Also, I bought most of my fittings at the Ace hardware down the hill - better price than the plumbing supply houses. They said they could order the 6" S&D but I already had enough.

JKJ

I'm in Utah and got my S&D pipe through Furgeson's, a plumbing/HVAC wholesale house. They also have locations in Indiana.

[Alan Schaffter]

Try John Deere Landscapes- make sure you are a "contractor" when you buy- makes a big $$$$ difference.