my diy drill jig

[Chris A Lawrence]

So i have been kicking this add a drill drill press around my basement for 10+ years saying i will use it for something when i upgraded to a real drill press. I finally did i made a drill wizard type jig for the lathe. Wasn't to hard to adapt it a few pieces of wood to attach it to the ways.

[Steve Schlumpf]

That's a pretty cool way to use an old drill press! Looking forward to seeing the result after you use it on a project! Have fun!

[Chris A Lawrence]

Tested it out tonight along with my home made indexing disc.

[Steve Schlumpf]

Looks like it works! Looking forward to seeing what sort of designs you come up with.

[Chris A Lawrence]

Made a second banjo to drill at 90 degrees. Now i need to get some larger plug cutters.