View Full Version : Blum hinge question
Jay Jolliffe
03-18-2018, 5:35 PM
I have to make a few cabinet doors to match what is already there. These doors are 3/4" thick and have a rabbet on three edges. On the butt, top & bottom. The rabbet is 1/4" deep & 1/2" wide. Do they make a Blum hinge that will work. The door insets into the face frame by 1/4"...I've either done inset of overlay but never had to do this before...will Blum hinges work for this application or should I be looking for something else?
Paul Girouard
03-18-2018, 6:12 PM
381778Rockler sells a Salice brand hinge that worked for 3/8” rabbited doors :
They’re no Blum brand hinge, and I’ve never used them, but they are available.
Peter Kelly
03-18-2018, 11:52 PM
$29.99 for a set of hinge arms and baseplates?!?
https://www.cabinetparts.com/p/blum-hinges-european-cabinet-hinges-BH71T6550
https://www.cabinetparts.com/p/blum-hinges-european-cabinet-hinges-BH175H9190
http://forums.finewoodworking.com/sites/forums.finewoodworking.com/files/comment_upload/75938/closed.jpg
http://forums.finewoodworking.com/sites/forums.finewoodworking.com/files/comment_upload/75938/open.jpg
Jerry Miner
03-19-2018, 1:01 AM
The Blum 155* (https://www.wwhardware.com/media/installation/b071t76-installation.pdf) hinge (71T7600N) can be used on a lipped door.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.