View Full Version : Hinges for a drop-leaf table
Mark Gibney
03-07-2018, 11:52 AM
I lost the hinges to a drop leaf table I refinished, and can't find anything online. Doesn't help that I don't know what I'm looking for.
Any chance one of you might know what I need by looking at the few photos here?
380726 380727 380728 380729
Thanks!
Mark
Jim Becker
03-07-2018, 12:36 PM
These may not be identical, but you can likely retrofit with a little attention to detail:
http://www.leevalley.com/us/hardware/page.aspx?p=40211&cat=3,41241,41261
Jerry Miner
03-07-2018, 1:48 PM
Maybe these? (https://www.hardwaretree.com/products.php?cat=Drop+Leaf+Hinges)
Mark Gibney
03-08-2018, 1:12 AM
Thank you both for the suggestions. Jim's look the part, I ordered them.
Jerry Miner
03-08-2018, 3:45 AM
Jim's look the part...
Hmmm. I'm sure you can make those work, but I still think these are closer to your originals:
380780
Mark Gibney
03-08-2018, 8:54 AM
Jerry you of course are right. I did in fact order the one's you suggested, not Jim's. That was a typo on my part. Thanks again!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.