Old Willys wagon anyone?

[Larry Edgerton]

I have a bug to restore an old Willys wagon like they stopped making in 1963, just like them and never owned one. Anybody here have one?

Its my other hobby. Taking the money I make doing woodwork and wasting it on cars. Other than that I would be perfect!:D

[Jim Becker]

Those are a pretty kewel vehicles and it would likely be a fun project if you can find one for your project!

[Lon Crosby]

Save yourself some (a lot of) money and 1000 headaches bybuying this one (http://willysforsale.com/ads/1961-willys-wagon-4wd-mostly-restored/ (http://willysforsale.com/ads/1961-willys-wagon-4wd-mostly-restored/))I purchase one (minimal rust) and started a rebuild long ago with the goal ofcreating a daily driver. Rebuilt a Chevy 350, swapped transmissions (automatic)and then reality stepped in. A driver needed disc brakes, new suspension,custom exhaust, complete rewire, new seats with belts, new interior, a good heater and AC and muchmore. I finally sold it in parts.

[Frederick Skelly]

I don't have one, but it sure sounds like a fun project Larry. Be sure to post picturex if you buy one!
Fred

[Bill Dufour]

Not much to them. Probably restore them over a summer. Do they even have brakes?
Bill D.

[Jim Koepke]

Do they even have brakes?

Ain't that what trees is for?

jtk

[Malcolm Schweizer]

We used to have a lot of them here, but they have rust issues and I haven’t seen one in a while. I have had a ‘53 and ‘54 Willys Jeep- one original, and one with an engine swap. I almost bought one of the wagons and was sternly warned not to due to the rust issues. Get an old Bronco- easier to get parts for and less rust issues.

[Larry Edgerton]

If I buy one I will be taking a trip to the desert SW, being from Michigan I am well aware of rust. This will not be a daily driver, just a toy. It will also not be my first rodeo, have owned over 200 cars/trucks, kind of a weakness of mine.;)

I just want it for tooling around the national forests, I do not nor will I ever live in an even remotely urban environment, so my worries about traffic are non existent. I have a 260 Ford V8 sitting on the engine stand all rebuilt so I have to buy something to put it in. See how that works?

[Howard Garner]

Had one back in the late 70's.
Rebuilt the motor and added Warn overdrive and Warn hubs.
If you keep the original engine, you should get the overdrive for today's highway driving.

Howard Garner

[John McClanahan]

I've owned a couple of Willys jeeps. If I were going to buy another one, this is what I would do. https://www.youtube.com/watch?v=7ILUCASgvO0&t=9s

[Rick Potter]

I recently sold my '48 Jeepster. 327 Chebby/PG, same body and frame. My biggest problem was the steering box which is an oddball Ross unit.After four rebuilds on two boxes, it still had steering problems. The guy I sold it to got a junkyard Saturn electric PS unit, and that solved the extremely hard steering problem.The 327 fit great, but check your 260, as it might be too long because of the water pump.

I assume you are thinking 2WD. Ever see the seven passenger version of the wagon? Two bench seats for six, plus a single sideways jump seat in the 'back back' for the 7th.

PS: You win...I have only had about 120 cars.

[Larry Edgerton]

I might keep an original engine for the summer, but I have had a few, and flatheads bite. The 260 I have came out of a same series Willys truck I put a Hemi in a few years ago, so I have all the stuff to just bolt it back up. 260 has the dizzy in the front where they belong.

Rick, there is a guy here I know that has a Jeepster with a 283, stock. It drives really nice. I am going to build a 4wd however. I have a wrecked TJ that I am going to use for the suspension/axles/tcase.

John, saw that video. To me the swap to a YJ is kind of a step sideways, where the TJ is a huge advancement in capability.

[Jim Becker]

I wish we had a section for these older Jeep-related vehicles at the Jeep Garage forum, but unfortunately, there's not a good place for this kind of build. I can't wait to see what you come up with!

[Larry Edgerton]

I wish we had a section for these older Jeep-related vehicles at the Jeep Garage forum, but unfortunately, there's not a good place for this kind of build. I can't wait to see what you come up with!

Ya, I checked that forum out in my searches, not a lot on old stuff. I have an advantage, my brother owns the Jeep Superstore so parts and knowledge are easy to come by. Getting harder to crawl around a car but I still have my fab skills from years of off road racing. I still build headers for some pro teams. I am going to try not to get too carried away, object is to use it to explore, not a hobby. We will see how that goes, I have an overkill issue.:cool:

On the subject of Mopar products, my brother bought an RT10. Drove it yesterday, and I have to say Dodge did their homework. Drives like a Viper.

[John McClanahan]

My Jeeps were of the Willys era and were not really designed for hi-way driving. They were always "loose" as there was wear and play in everything. The YJ running gear puts modern dependability under the classic body.

[Jim Becker]

Larry, JeepGarage is a good site for modern era Jeep, however, and I'm enjoying helping out with the place.

[James Pallas]

A friend of mine had one. He had adapted a 250 later model Chevy 6 into it. We spent many hours using it for hunting the mountains of NM and Colorado. It was trailed to the hunting ground. It was nice to have heat and shelter after a long day outside. He had also adapted a winch to the rear bumper. That was handy at times. It would not go everywhere but it would go where pick ups and such would not cut it. Reminds me of lots of fun times. I would not want it for everyday use tho.
Jim