cody michael
02-25-2018, 2:08 PM
I purchased this a few weeks ago, the felt on the second roller was tore up pretty good. My wife had some Sheets of felt and gave me a few, I used spray adhesive and it glued up quickly and easily. I have the sandpaper on both rollers, I followed a few people on forums I read and drilled and tapped a 1/4-20 hole to hold the paper rather then using the clips. So far it seems to work great and was easy to put on.
My question is on the feed roller the chain rubs along a piece of the frame, If I tap the gear on the roller in the aluminum spacer no longer fits. any idea? should I just let the chain rub on the frame? it is slow moving.
My question is on the feed roller the chain rubs along a piece of the frame, If I tap the gear on the roller in the aluminum spacer no longer fits. any idea? should I just let the chain rub on the frame? it is slow moving.