wall hanger for large bowl

[CHARLES D Richards]

Any suggestions for how to make a wall hanger for large bowls (18-21"). I would prefer not to buy one but want it to look nice and not cover up the rim. I will need about 3 hangers.

thanks,
Dave

[Dennis Ford]

How about metal strips (1"wide x 1/8"thick?) that are bent to the bowl shape and hook over the rim. Depending on your decor, brass or black iron might look good.

[CHARLES D Richards]

thanks Dennis, I may give that a try.

[Mark Greenbaum]

Search for plate display hangers, and you can get some ideas.

[CHARLES D Richards]

thanks Mark, I did that before I made the post. Couldn't find anything that jumped out at me

[Jeffrey J Smith]

I’ve seen a simple copper wire brought around a foot on a bowl, then wrapped around a small dowell; turn the dowel to tighten the wire loop snug to the foot, withdraw the dowl and you’ve got a hanger for a single nail (or whatever) for hanging on the wall. Easily reversed/removed, yet secure hold. Always wanted to give it atry - let me know if it works out...