James Pallas
02-15-2018, 3:08 PM
Sometimes I just like to try things. I watched some videos of Kaare Loftheim, Phil Lowe and Frank Klausz cutting dovetails. I have been doing some full blind dovetails of late and trying to get a handle on pins first. The last picture is the first attempt. The other four are the corners of a box just to see if I could do it with only base lines marked and pencil used to mark the tails from the pins. No verticle markings those were be eye and the pin angles were by eye only. Took about an hour. I was pleased with the result. Good fun and I may be a pins first convert.
Jim
Jim