View Full Version : Grinding wheels
Tom Wilson66
02-14-2018, 8:49 PM
I use 6" grinding wheels on my grinder. How do I know when to replace them. I do use the Oneway sharpening jig. I am not interested in getting the diamond wheels, nor do I want to get a larger grinder.
John K Jordan
02-14-2018, 11:45 PM
I use 6" grinding wheels on my grinder. How do I know when to replace them. I do use the Oneway sharpening jig. I am not interested in getting the diamond wheels, nor do I want to get a larger grinder.
Basically I think you replace the wheels on a grinder when you decide they are too small for you. I don't know of any guidelines. When I was sharpening lathe tools on standard 8" wheels I replaced them before they got to 7-1/2" diameter because I didn't want more concavity than that on my turning tools. But I think it is a matter of preference.
For one grinder in my welding shop I let the wheels get smaller since don't sharpen tools with it.
JKJ
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.