glenn bradley
02-11-2018, 12:28 PM
Trying to elevate my hand cut dovetail status from "hack" to "reasonably proficient" I found myself in need of a moxon-like device. Space is at a premium here so I came up with an add-on for my Bench-on-Bench. I grabbed a scrap of red oak and a previously used piece of t-track. I cut a rabbet to accept the t-track, drilled the track with through holes and coutersinks and mounted it to the scrap.
378832
I marked the area where the scrap would be glued to the BonB and sanded the finish off.
378831
Some glue and #10 screws.
378834
And it works like so . . .
378833
These holddowns were picked up at a Woodworking show some years back. Other t-track type holddowns you may have will work as well.
378835
378832
I marked the area where the scrap would be glued to the BonB and sanded the finish off.
378831
Some glue and #10 screws.
378834
And it works like so . . .
378833
These holddowns were picked up at a Woodworking show some years back. Other t-track type holddowns you may have will work as well.
378835