Bram de Jong
01-25-2018, 5:46 PM
Hey peoples,
I got one of these second hand for 20€: https://imgur.com/a/P3GPH
The "inner" brass is REALLY tight in there, I can move it with my fingers but it's pretty tough.
I tried sliding both brass slider and stock to the "back" of the mortise bit by bit, but when the stock is about 1.5cm from the edge they both get stuck pretty hard. I only tried by hand so far.
Any hints on making this thing work better? How about getting the brass/stock off the stem?
grts,
Bram
I got one of these second hand for 20€: https://imgur.com/a/P3GPH
The "inner" brass is REALLY tight in there, I can move it with my fingers but it's pretty tough.
I tried sliding both brass slider and stock to the "back" of the mortise bit by bit, but when the stock is about 1.5cm from the edge they both get stuck pretty hard. I only tried by hand so far.
Any hints on making this thing work better? How about getting the brass/stock off the stem?
grts,
Bram