dados and band edging

[tom lucas]

I plan to edge some mahogany plywood using a 60 degree edge banding router bit set like this:
https://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bit_edgeband_ogee.html?zoom_highlight=edge+banding +bit

Then I'll be building a shelf carcass from this material with dado reliefs for the center members (2 vertical, 2 horizontal, tick-tac-toe style) My question is should I install edging and then dado or dado before installing band edges?

[Martin Wasner]

You could do a blind dado and not have to worry about notching the banding manually.

I would edge band after in either scenario

[Wayne Lomman]

Machine the edge profile and edge strip, machine the dadoes and then glue the edge strip on your panels. Finish sand the panels and then assemble. Touch up the sanding and you are done. Doing it this way creates blind dadoes with no special set ups. Cheers

[tom lucas]

Thanks guys. That makes perfect sense. Just not sure about where the edge profiles intersect at Tee junctions. I guess the edge banding covers it anyway.