tom lucas
12-31-2017, 8:10 PM
I plan to edge some mahogany plywood using a 60 degree edge banding router bit set like this:
https://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bit_edgeband_ogee.html?zoom_highlight=edge+banding +bit
Then I'll be building a shelf carcass from this material with dado reliefs for the center members (2 vertical, 2 horizontal, tick-tac-toe style) My question is should I install edging and then dado or dado before installing band edges?
https://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bit_edgeband_ogee.html?zoom_highlight=edge+banding +bit
Then I'll be building a shelf carcass from this material with dado reliefs for the center members (2 vertical, 2 horizontal, tick-tac-toe style) My question is should I install edging and then dado or dado before installing band edges?