Help identify plane

[Jimmy White]

Any ideas on this one?

374601

374602

[Nicholas Lawrence]

Under all the rust you might find a name on the iron. I can’t tell from what I can see in the photos.

[Jim Koepke]

The only clue seems to be the lateral adjuster. It looks like what Sargent used. It could be one they made for a private company.

That looks like it could be a lot of work to get back to user status.

jtk

[Jimmy White]

It does have a name that can be barely made out, Malibrus, Ma***us ??

[John Lanciani]

it does have a name that can be barely made out, malibrus, ma***us ??

made in usa?

[bridger berdel]

That lateral adjuster looks like Stanley Victor to me.

[steven c newman]

Sometime around 1962, Stanley crimped that lever's end down. Has the rib on the toe and heel, could be either an 1105, or a #1205......May have been made to be sold by Sears, too. Late 1950s Stanley Jack plane. Clean it up, sharpen the iron, and put it to work.

[Jimmy White]

That’s it! Duh..

MADEINUS

[Jim Koepke]

Steven is likely on the right track. My tendency is to mostly ignore planes made after type 13. (no ring around the knob)

Most of the later planes to cross my path are more crimped than that one.

jtk