View Full Version : Well Shut My Mouth
Jim Koepke
12-19-2017, 5:07 PM
Some planes without adjustable mouths or frogs may benefit from this article:
https://www.popularwoodworking.com/woodworking-blogs/close-throat-plane-shimming-blade
jtk
Rick Malakoff
12-19-2017, 6:22 PM
Thanks, simple as that!
Merry Christmas
Rick
Derek Cohen
12-20-2017, 4:58 AM
I posted this modification here quite a while back. A few times.
I used brass shim to close up the mouth of a LN #103. This was epoxied to the bed behind the mouth, and serves to raise the blade at this point ....
https://s19.postimg.org/b6fftgnkz/LN103-3a_zpsg9fhr6hf.jpg
https://s19.postimg.org/hiul3aqn7/LN103-2a_zpsykbbtf0z.jpg
https://s19.postimg.org/3nwaktw83/LN103-1a_zpsuxrwlahs.jpg
Regards from Perth
Derek
lowell holmes
12-20-2017, 9:49 AM
I tried to open the article, but pop wood is not working for me.
Jerry Olexa
12-23-2017, 4:24 PM
Thanks Jim...Useful article,,
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.