band saw fence set up stop (shop made )

[jack forsberg]

have you ever set your saw fence up to do a precise cut only to have to remove the fence for another cut and have to reset the fence ? have you ever tried to move the fence so that when re sawing the cut come off the out side in even thickness ? How about setting the fence to many location very accurately and quickly with the saw running ? I made this simple fixture so that all of that is simple to within .001" .


https://www.youtube.com/watch?v=le-9Jzju-Cg

[Tom Trees]

<p>
It seems theres lots of pros to having a fence rail like that instead of a round bar type... I wonder how easy itill be for me to make Dang, Mr Forsberg ... thats another jumper singed with the angle grinder you cost me ! https://www.sawmillcreek.org/clientscript/ckeditor/plugins/smiley/images/images/smilies/smile.gif</p>

[Mike Kees]

Excellent. All the best ideas and designs are so simple once one sees them. However having the kind of mind that can come up with the design to begin with is a gift. Thanks for posting this. Mike.

[Carroll Courtney]

That is fantastic,now having a lathe and a mill once I learn how to use them that will be on my project list.Thanks for posting----Carroll

[Bill Adamsen]

Nice illustrative video, thanks Jack! I've drop a little brass disc into my fence clamp hole to avoid making divits along the fence rail. If I had a lathe I would turn down a little pin as you've shown to hold a plate. I think there is enough room for a plate under the casting. That is quite clever. I do like the stop.

[jack forsberg]

thanks guys . working on the upper guides now as I finished the table guilds.

https://www.instagram.com/p/BciX8mOHO3E/


https://www.youtube.com/watch?v=6bLNizuw4CI

[Tom Trees]

I cant wait for the results of the resaw competition https://www.sawmillcreek.org/clientscript/ckeditor/plugins/smiley/images/images/smilies/biggrin.gif
Can we get in on what your talkin bout ?
Good luck Jack

[jack forsberg]

I cant wait for the results of the resaw competition https://www.sawmillcreek.org/clientscript/ckeditor/plugins/smiley/images/images/smilies/biggrin.gif
Can we get in on what your talkin bout ?
Good luck Jack
just a test for now . wood from one board is being shipped to 4 people as the sample wood . i will do a full video and review then . just to be clear this is just a cheep carbon blade.


https://www.youtube.com/watch?v=MFB80guYDLs&amp;feature=youtu.be