Nate Secrist
12-05-2017, 1:48 PM
Hi,
I recently bought a 1997 28-203 Delta 14-inch bandsaw - it is the one that I have wanted to buy to replace my junky Jet 10-inch plastic machine.....
Anyway - I have removed all the rust from the cast-iron table and it looks nice.
The orange tires look very hard and crusted and they seem almost to be "bonded" to the tire.....
I bought new Carter Blue Urethane tires for the saw - the question is "How is the best way to get the old crusty tire off the wheel?"
I have seen quite a few videos on how to install new tires - but none of these seem to show how to remove a tire that seems to be stuck to the wheel.
What is the best way to do this?
I would like to not have to remove the wheels to get the tires off, because the wheels seem to be balanced pretty good now.....
Should I remove the wheels and then pry off the tires with a screwdriver?
Please let me know the best way to do this.....
Send me some links to a video that shows this - if there is one on youtube.
Thanks Alot
Nate
I recently bought a 1997 28-203 Delta 14-inch bandsaw - it is the one that I have wanted to buy to replace my junky Jet 10-inch plastic machine.....
Anyway - I have removed all the rust from the cast-iron table and it looks nice.
The orange tires look very hard and crusted and they seem almost to be "bonded" to the tire.....
I bought new Carter Blue Urethane tires for the saw - the question is "How is the best way to get the old crusty tire off the wheel?"
I have seen quite a few videos on how to install new tires - but none of these seem to show how to remove a tire that seems to be stuck to the wheel.
What is the best way to do this?
I would like to not have to remove the wheels to get the tires off, because the wheels seem to be balanced pretty good now.....
Should I remove the wheels and then pry off the tires with a screwdriver?
Please let me know the best way to do this.....
Send me some links to a video that shows this - if there is one on youtube.
Thanks Alot
Nate