PDA

View Full Version : 1/2" Thick Plastic Question



Liesl Dexheimer
12-01-2017, 11:51 AM
I've just emailed Rowmark asking if they can create 1/2" thick 3-ply textured plastic. Does anyone have any ideas where I may be able to locate something similar to the attached photos? The challenge here is that this customer would like me to label & outline various tools (like brooms & shovels). There could be a large qty of these signs but they would most likely be 4-6 feet wide x 5-7 feet tall. I had thought of someone I know who has a CNC but their CNC size is 4 feet x 4 feet. I had thought of Sign-ply but that wouldn't be good since it is sandwiched with plywood and these signs are going in a factory that processes foods. Does anyone know of any sign suppliers or materials that might work?

372626 372625

Jerome Stanek
12-01-2017, 12:18 PM
King Colorcore has what you need but it is pricey and heavy. Where are you located I have a 4X8 cnc

Liesl Dexheimer
12-01-2017, 12:57 PM
I'm located in Southeast MA so I'm guessing shipping would be pretty pricey too.