Dan T Jones
11-22-2017, 9:54 AM
Hello all. A year ago I purchased a C3-41 which is a 2000 year model with a 48" slider (actually a little over 50" long). I have the "regular" miter gauge which is about 44" long mounted in the "pusher" configuration and the table extend. I'm certainly still feeling my way along after using a regular table saw for over 40 years.
I would appreciate. your thoughts/wisdom on upgrading to the outrigger table and crosscutting with that. I am a hobbyist and I mainly work about 70% solid wood 30% plywood/cabinets. I have about $7000 invested in the C3-41 including the mortiser, new power feeder and alot of shaper cutters and mortise bits.
It appears that the current outrigger table will fit to my machine.
http://us.feldershop.com/en-US/en-US/en-US/en-US/Moulding/Accessories/Outrigger-tables/Outrigger-table-1100.html
It looks like to be functioning I would also have to get the fence and coupling system. Does anyone know if my current fence would work? I don't see in the pictures the 90 degree stop.
http://us.feldershop.com/en-US/en-US/en-US/en-US/Moulding/Accessories/Fence-accessories/HAMMER-Crosscut-fence-1300.html
http://us.feldershop.com/en-US/en-US/en-US/en-US/Moulding/Accessories/Fence-accessories/Coupling-system-on-the-outrigger.html
Not a cheap upgrade as all the above would be about $1300 before shipping cost. Are there downsides to the outrigger?
Thanks for the help.
Dan
I would appreciate. your thoughts/wisdom on upgrading to the outrigger table and crosscutting with that. I am a hobbyist and I mainly work about 70% solid wood 30% plywood/cabinets. I have about $7000 invested in the C3-41 including the mortiser, new power feeder and alot of shaper cutters and mortise bits.
It appears that the current outrigger table will fit to my machine.
http://us.feldershop.com/en-US/en-US/en-US/en-US/Moulding/Accessories/Outrigger-tables/Outrigger-table-1100.html
It looks like to be functioning I would also have to get the fence and coupling system. Does anyone know if my current fence would work? I don't see in the pictures the 90 degree stop.
http://us.feldershop.com/en-US/en-US/en-US/en-US/Moulding/Accessories/Fence-accessories/HAMMER-Crosscut-fence-1300.html
http://us.feldershop.com/en-US/en-US/en-US/en-US/Moulding/Accessories/Fence-accessories/Coupling-system-on-the-outrigger.html
Not a cheap upgrade as all the above would be about $1300 before shipping cost. Are there downsides to the outrigger?
Thanks for the help.
Dan