steven c newman
11-17-2017, 11:52 AM
Had one of these sitting around. gave the frame a decent clean up. Tried a wider blade,,
371736
As this 12" blade was a bit too short to make a frame saw with.....
371737
11 ppi, crosscut.....needs sharpened, anyway. Dug around, and found another blade..
371738
I have no idea who made the frame...both ends are adjustable...the blade?
371739
At least it can cut some brass or copper items....
Have another such hacksaw....but it is a single adjuster frame. I'll have to dig it out, sometime, and find out the maker on that one.
First one I have seen with length adjusters on both ends....:confused:
371736
As this 12" blade was a bit too short to make a frame saw with.....
371737
11 ppi, crosscut.....needs sharpened, anyway. Dug around, and found another blade..
371738
I have no idea who made the frame...both ends are adjustable...the blade?
371739
At least it can cut some brass or copper items....
Have another such hacksaw....but it is a single adjuster frame. I'll have to dig it out, sometime, and find out the maker on that one.
First one I have seen with length adjusters on both ends....:confused: