steven c newman
11-10-2017, 3:47 PM
Had some left over from the last few projects....some 3/4" and some 1/2" x 8" wide clear poplar....:D
371394
Had to make do with out any hinges...bead details hide a secret...
371395
Look for a 45 degree saw cut.....:cool:
371396
Hand cut through dovetails on the corners. Bead details were with a Stanley #45 using a single bead #23 cutter
Bottom is 1/2" thick Poplar, rebated to fit into 1/4" deep grooves. Same grooves the lid slides in. Couple of coats of Amber Shellac.
Close the lid, and hopefully the joint disappears..:cool:
371398
Just cleaning out the cut-off bin....:D
371394
Had to make do with out any hinges...bead details hide a secret...
371395
Look for a 45 degree saw cut.....:cool:
371396
Hand cut through dovetails on the corners. Bead details were with a Stanley #45 using a single bead #23 cutter
Bottom is 1/2" thick Poplar, rebated to fit into 1/4" deep grooves. Same grooves the lid slides in. Couple of coats of Amber Shellac.
Close the lid, and hopefully the joint disappears..:cool:
371398
Just cleaning out the cut-off bin....:D