Dan T Jones
11-09-2017, 4:05 PM
I thought I should make this a separate thread.
I am in the process of determining if the current Hammer Outrigger 1100 will work on my 1999 C3-41 with a 49" slider. Would someone width a current model mind measuring the width of the slot on the side of the table and the distance from the top of the table to the slot? So far Felder has not been able to determine if the outrigger will fit.
http://us.feldershop.com/en-US/en-US...able-1100.html (http://us.feldershop.com/en-US/en-US/en-US/en-US/Sawing/Accessories/Outrigger-tables/Outrigger-table-1100.html)
Also I'd like to get the width of the slot on the surface of the current model slider table. I'm thinking about the "Trimming Equipment" for making long straight line rips.
http://us.feldershop.com/en-US/en-US...Equipment.html
(http://us.feldershop.com/en-US/en-US/en-US/en-US/Sawing/Accessories/Sliding-table-accessories/HAMMER-Trimming-Equipment.html)
Thanks for any help. BTW, both the slider side slot and the slot in the top surface of the slider appears to be 10mm wide on my machine. The distance from the slider top surface down to the side slot is also 10mm.
Dan
I am in the process of determining if the current Hammer Outrigger 1100 will work on my 1999 C3-41 with a 49" slider. Would someone width a current model mind measuring the width of the slot on the side of the table and the distance from the top of the table to the slot? So far Felder has not been able to determine if the outrigger will fit.
http://us.feldershop.com/en-US/en-US...able-1100.html (http://us.feldershop.com/en-US/en-US/en-US/en-US/Sawing/Accessories/Outrigger-tables/Outrigger-table-1100.html)
Also I'd like to get the width of the slot on the surface of the current model slider table. I'm thinking about the "Trimming Equipment" for making long straight line rips.
http://us.feldershop.com/en-US/en-US...Equipment.html
(http://us.feldershop.com/en-US/en-US/en-US/en-US/Sawing/Accessories/Sliding-table-accessories/HAMMER-Trimming-Equipment.html)
Thanks for any help. BTW, both the slider side slot and the slot in the top surface of the slider appears to be 10mm wide on my machine. The distance from the slider top surface down to the side slot is also 10mm.
Dan