Bob Cooper
11-08-2017, 10:21 AM
i build a lot of cabinets for the house so plywood is typically either 48" wide or 24" wide when i store it. I've been leaning it against the walls or flat on the garage floor outside my shop. My shop is attached to the garage.
This weekend i finally decided i needed to do *something* about the storage or the plywood. I looked at various approaches and finally settled on something very simple and probably obvious to ya'll but thought i'd share anyway.
This was very simple, cheap and quick. I do know that there's still the issue of getting to stuff in the back but for me that's not much of an issue
. 371241371242
This weekend i finally decided i needed to do *something* about the storage or the plywood. I looked at various approaches and finally settled on something very simple and probably obvious to ya'll but thought i'd share anyway.
This was very simple, cheap and quick. I do know that there's still the issue of getting to stuff in the back but for me that's not much of an issue
. 371241371242