Timo Christ
11-03-2005, 2:58 AM
Hello Festool Users,
could someone measure the dimensions of the festool guide rail cross section for me? I have attached a drawing with the dimension A, B and C. The drawing corresponds to my Bosch guide rails and i'm wondering if a Festool TS55 (CS) would fit.
The bosch saw (GKS66CE) kinda doesn't want to saw straight, and on the rail this leads to jamming.. => bad. It used to work alright.. i will try to fix it, but i guess there aren't many variables. There is a little bit of play in the height adjustment mechanism.
I should have invested in festool from the start.. anyway i would like to continue using the bosch guide rails if possible.
Thanks and Regards!
Timo
could someone measure the dimensions of the festool guide rail cross section for me? I have attached a drawing with the dimension A, B and C. The drawing corresponds to my Bosch guide rails and i'm wondering if a Festool TS55 (CS) would fit.
The bosch saw (GKS66CE) kinda doesn't want to saw straight, and on the rail this leads to jamming.. => bad. It used to work alright.. i will try to fix it, but i guess there aren't many variables. There is a little bit of play in the height adjustment mechanism.
I should have invested in festool from the start.. anyway i would like to continue using the bosch guide rails if possible.
Thanks and Regards!
Timo