Shave Pony add on

[Bill Berklich]

I built a Stumpy Nubs saw bench and it has been great! Make sawing a lot easier so I did more of it which led me to try and make a Three legged stool. Trying to shave taper tenons made me realize the value of a shave horse but no way could I squeeze one in to my “shop”. All this led me to make a shave pony for the Stumpy Nubs saw bench. It’s held in place with a 1” dowel underneath and the 1-1/2” foot peg comes out so the pony can be removed.


370539370541370542

[Frederick Skelly]

Thanks for posting this Bill. I didn't know anything about shave horses or shave ponies, and trying to do that in my bench vise just stinks. Something like this could work for me too.

Fred

[Bill Berklich]

Here's a couple more pictures in case you want to do something like it. It really helps for certain tasks


Mine is scrap 2x4s, and a 3/8" steel rod



370576370577

[Frederick Skelly]

Yup. Those help. Thanks!
Fred