Infinity Laser Kerf saw blade

[Art Moore]

My Google-fu has failed me this morning. Does anybody have a source for the Infinity 10" Laser Kerf (.063) 010-046 table saw blade besides the main Infinity web site? They show out of stock until at least 11-17.

[Jamie Buxton]

Here's an outfit which offers a 10" blade with a 1/16" kerf: http://www.totalsawsolutions.com/page/10-in-micro-kerf-40-table-saw-blade Pricey though.

And here's a 7" blade which is supposed to cut a 1/16" kerf. Considerably less expensive. https://www.homedepot.com/p/Diablo-7-1-4-in-x-40-Tooth-Finish-Saw-Blade-D0740R/100017783

[Art Moore]

Jamie, thank you for those links. For 15 bucks I think I'll try a 7-1/4 blade and see if it works with my crosscut sled. My use for this is for pen blank segments, so 3/4 to 1 inch depth should be the max I need.

[Jamie Buxton]

I think many thin-kerf Skilsaw-type blades are now down in the 1/16" kerf range, if you can't immediately find that Freud one. No-name ones are down in the $5 area.

[Earl McLain]

Art--i'm using a Popular Tools 7 1/4" in my 10" saw now for the same purpose. Carbide Processors sells the brand, and my kerf for Celtic knots is spot on 1/16".
earl