steven c newman
10-12-2017, 10:01 PM
And one that needed rebuilt....Had the "remains" of a Fulton #3416 and decided to try to get it working, again.....
369553
Had to find a handle for the rear. There WAS a brass, phillips headed screw behind the handle....replaced with a steel, slotted head one...
369554
Same with the front knob..now has a steel screw in place of the brass one...dug around to find a chipbreaker and a iron that would work. Cleaned the body up
369555
Test drive wasn't too hateful Set this aside, and cleaned up another...
369556
Slightly bigger....and longer..
369557
It was covered in dust and grime. Cleared all that away. Found a name on the toe..
369558
STANLEY Rule and Level Co. No. 28
369559
About the same size as a No. 6...
Maybe later this weekend, I can get the No. 31 all cleaned up...we'll see.
Will need help get this item up the stairs and out of the shop..
369560
Don't want spiders to drop down onto the varnish.....need this out of the shop.
369553
Had to find a handle for the rear. There WAS a brass, phillips headed screw behind the handle....replaced with a steel, slotted head one...
369554
Same with the front knob..now has a steel screw in place of the brass one...dug around to find a chipbreaker and a iron that would work. Cleaned the body up
369555
Test drive wasn't too hateful Set this aside, and cleaned up another...
369556
Slightly bigger....and longer..
369557
It was covered in dust and grime. Cleared all that away. Found a name on the toe..
369558
STANLEY Rule and Level Co. No. 28
369559
About the same size as a No. 6...
Maybe later this weekend, I can get the No. 31 all cleaned up...we'll see.
Will need help get this item up the stairs and out of the shop..
369560
Don't want spiders to drop down onto the varnish.....need this out of the shop.