PDA

View Full Version : Utility Room Safety Question



Raymond Fries
10-12-2017, 4:03 PM
I am doing some storage work in my utility room. This picture is a rough idea of the work.

369530

The water line will be relocated. The boxes represent the size of the cabinets. The left is 24" wide and the right is 9" wide. There will be about 1/2" space between each of the gas furnace, The two cabinets, and the gas water heater respectively.

The cabinets will be mounted much higher as they are resting on water pipes.

My question is there a problem with mounting cabinets this close to the equipment.

THanks

Ken Fitzgerald
10-12-2017, 4:25 PM
If you ever have to replace or service the two appliances, they probably are too close.

Check the manuals for the furnace and the water heater to see if minimum clearances are necessary.

Lee Schierer
10-12-2017, 5:24 PM
Your best bet is to consult the manufacturer of your water heater and furnace. Clearances vary with the type of furnace and its age and are specified by the manufacturer based on the UL testing that was done on their units.

Charlie Velasquez
10-12-2017, 7:25 PM
Put them on wheels. I am assuming the water pipes are attached to the walls and wheels would not interfere.

Raymond Fries
10-12-2017, 7:35 PM
Great tips guys.

Thanks