View Full Version : Speedy 100 "on" when it shouldn't be

Natasha McWilliams
10-07-2017, 4:46 PM
I've been having a lot of issues with my laser lately, but this one seems to be worse than any other I've had so far.

When you turn on the laser it does its usual boot up, the head resets to the 0,0 position and the bed lowers to 0 and it beeps.

When you focus the laser head is when things start to go sideways, the red dot isn't the red positioning dot, it's actually the laser ON.

Nothing has been sent to the laser through the computer, there is no reason the laser itself should be firing.

I've sent in a request to tech support but with it being a long weekend here I doubt I will hear anything back until late next week (if not longer).

Has anyone had this issue? What caused it?


Kev Williams
10-08-2017, 12:21 AM
I can see the laser is firing, but the red dot isn't the main laser, it's the red dot laser, the main beam is invisible :)

Tickle causes the laser to fire occasionally to keep it energized, could be your tickle adjustment is severely out of whack...