Marc Jeske
09-30-2017, 11:28 PM
<p>
Please see link at bottom before answering ...</p>
<p>
</p>
<p>
I did some quick archive searching, but askin to confirm anyway..</p>
<p>
This is RIGHT tilt, yes?</p>
<p>
I am used to left tilt, so is this bad?</p>
<p>
</p>
<p>
I do not know for sure yet if 3ph or single ph.. yet to preview..but somewhere I read these ONLY came as 230 1 ph.</p>
<p>
True or false?</p>
<p>
</p>
<p>
May be a model w riving knife, photos don't show....OR.. the older ones w this model # I read possibly NOT have knives? </p>
<p>
If no factory RK, able to add aftermarket possible on this specific model?</p>
<p>
</p>
<p>
Coming from a "Door/window" shop at old lumberyard. Was in use.</p>
<p>
I really won't be able to have my onsite scout Guy pull the belt to feel motor/arbor bearings...Probably ok, but have to chance that.</p>
<p>
Just turn the blade by hand and "feel" if "smooth" ?</p>
<p>
Will actuate tilt/height wheels to check that also.</p>
<p>
Lastly, what would you Folks consider a fair price range if this was on open market, like Clist, based on the info above and the link photos? I'm guessing $7-9 ? if functioning "OK" ?</p>
<p>
I would ceiling my bid wayy less, but want to know market realistic price.</p>
<p>
Thank you all, need answers to all above by close of Sunday eve, 10/1. Marc</p>
<p>
http://www.hoffonlineauctions.net/cgi-bin/mnlist.cgi?hoff14/146/1</p>
Please see link at bottom before answering ...</p>
<p>
</p>
<p>
I did some quick archive searching, but askin to confirm anyway..</p>
<p>
This is RIGHT tilt, yes?</p>
<p>
I am used to left tilt, so is this bad?</p>
<p>
</p>
<p>
I do not know for sure yet if 3ph or single ph.. yet to preview..but somewhere I read these ONLY came as 230 1 ph.</p>
<p>
True or false?</p>
<p>
</p>
<p>
May be a model w riving knife, photos don't show....OR.. the older ones w this model # I read possibly NOT have knives? </p>
<p>
If no factory RK, able to add aftermarket possible on this specific model?</p>
<p>
</p>
<p>
Coming from a "Door/window" shop at old lumberyard. Was in use.</p>
<p>
I really won't be able to have my onsite scout Guy pull the belt to feel motor/arbor bearings...Probably ok, but have to chance that.</p>
<p>
Just turn the blade by hand and "feel" if "smooth" ?</p>
<p>
Will actuate tilt/height wheels to check that also.</p>
<p>
Lastly, what would you Folks consider a fair price range if this was on open market, like Clist, based on the info above and the link photos? I'm guessing $7-9 ? if functioning "OK" ?</p>
<p>
I would ceiling my bid wayy less, but want to know market realistic price.</p>
<p>
Thank you all, need answers to all above by close of Sunday eve, 10/1. Marc</p>
<p>
http://www.hoffonlineauctions.net/cgi-bin/mnlist.cgi?hoff14/146/1</p>