Brian Lamb
09-23-2017, 6:45 PM
I had some issues a month back or so when Windows 10 did an update and completely messed up my X-600 driver. Reloaded that and the laser is working well, except, I am having issues when wanting to raster some engraving and then vector out the part. Today I was working on putting a VFD on my old drill press and wanted to make a switch cover. Drew it up with some black text and lines to be engraved, then the three round holes and square hole for the switch are blue, the outline is red.
When I tried lasering it, I get a raster pass for all of it, black, red and blue and no vector cutting at all. I took pictures of my settings on all the pages, I don't see what/why it's working this way, so thought maybe somebody else here would have an idea.
The first screen you see when you open the printer driver, General tab
368416
The second tab, Color
368417
The third tab, Composite
368418
The fourth tab, Layout
368419
The fifth, PrePress
368420
This is when you hit Preferences from the "General" print tab, where you set your power settings and colors
368421
The engraving field tab
368422
And the Advanced tab
368424
When I tried lasering it, I get a raster pass for all of it, black, red and blue and no vector cutting at all. I took pictures of my settings on all the pages, I don't see what/why it's working this way, so thought maybe somebody else here would have an idea.
The first screen you see when you open the printer driver, General tab
368416
The second tab, Color
368417
The third tab, Composite
368418
The fourth tab, Layout
368419
The fifth, PrePress
368420
This is when you hit Preferences from the "General" print tab, where you set your power settings and colors
368421
The engraving field tab
368422
And the Advanced tab
368424