PDA

View Full Version : please post pic of your deep engraving work on your 30 watt chinese laser



ian mcfarland
09-10-2017, 9:20 PM
I would like to see some of your deep engrave work on your chinese 30watt fiber system. If you have stuff on ther USA built systems please post that too. Also higher wattage is welcome to but let me know your wattage.

John Lifer
09-11-2017, 9:57 AM
20 Watt, 367688
Just text on aluminum AR lower. Maybe 30 seconds total time. A couple of thou deep.
367689
Scrollwork. Did in two parts. Mark in the pivot first to make sure it was centered in the circle, and then the rest.
It took maybe 20 sec for the first and a couple of three minutes for the remainder. Not real deep except for some small items. Which are again about 2 thou deep.
367690
about a thou deep. Just about 15 seconds.