Minimax Slider With Built in Router Table

[Chris Parks]

I recall someone in the not too distant past posted some photos of their MM Slider that had a router table built into it. I have tried searching but my search skills must be pretty low so I am wondering if someone can point me in the right direction. Thanks.

[Joshua Bass]

Do you mean a shaper (not a router, but similar function) .

Minimax makes several of these ranging in price and features:

https://www.scmgroup.com/en_US/scmwood/products/joinery-machines.c884/universal-combined-machines.887/minimax-cu-300c.721

[Frankie Hunt]

Perhaps it was Jim Becker that added a router table to his slider, but that was a while back.

[Erik Loza]

I had a customer who did this to his SC3 and sent me photos but don't have access to them any more. IIRC, he replaced the steel outfeed table with a laminated ply one and it had the router lift in there. He apparently loved it but I've lost touch since then.

Erik

[Chris Parks]

Thanks guys, it was a table that had been added by the owner.

[Derek Cohen]

Hi Chris

As I mentioned to you elsewhere, I don't think that this is what you had in mind, however someone else here may find it useful ...

My Hammer K3 Winner has the short outer table. I decided to built a router table into this ..

https://s19.postimg.org/vfisrnn37/router-space1.jpg

It is a work in progress at this time, and I'll post pictures if anyone is interested (I'm sure the audience for this is tiny) ...

https://s19.postimg.org/xgy5eoxwj/image.jpg

https://s19.postimg.org/cue1743vn/9-1a.jpg

This is where the router plate will be situated ...

https://s19.postimg.org/xv42s17dv/11a.jpg

Regards from Perth

Derek

[glenn bradley]

Thanks guys, it was a table that had been added by the owner.

Jim Becker did indeed add a Bench Dog rig to his machine.

[Jim Becker]

Yes, it's mine. There's a whole thread here about it:

http://www.sawmillcreek.org/showthread.php?54500-Project-Router-Station-For-Sliding-Table-Saw&highlight=BenchDog

[glenn bradley]

Thanks Jim. I was responding from my phone and searching is awkward.

[Chris Parks]

Thanks Jim, it gives me more ideas.